Güde knife sheath – No. 5200/16
High quality leather sheath / knife sheath for knives with a blade length of up to 16 cm and a blade width of up to 2.5 cm.
- Length: 16.5 cm
- Width: 4.4 cm
- Cowhide
- sewn
- riveted
Güde is a Solingen knife manufacturer with over 100 years of tradition. The knives are forged by hand in small quantities. The blades are made of forged chrome-vanadium-molybdenum knife steel.
All knives lose their sharpness over time. Professional chefs sharpen their knives once briefly with the sharpening steel before each operation. The knife is then even after years sharp as on the first day. A sharpening steel should be at least 26cm long. The hardness and the surface are also crucial for a really sharp knife. The hardness of the sharpening steel must be higher than the blade hardness. With a sharpening steel from Güde you are making the right decision.
To keep the knife blades sharp for a long time, they belong in a knife block or if they are stored in the cutlery drawer, they should be protected by a knife sheath.
Properly sharpen knives
Right-handed people take the knife in their right hand and the sharpening steel in their left. Then the knife, at an angle between 15-20 degrees, is drawn evenly from the shaft to the tip of the knife over the entire steel. Alternate about ten times each.
Professional chefs pull their knives over the sharpening steel before every operation and thus permanently maintain the sharpness of their Güde knives.
Care instructions
Fine knives should be cleaned the way they were made: by hand. In most cases, it is quite sufficient to wipe the blade with a damp cloth. You should make sure that the knife is not left uncleaned for a long time. There are food residues (e.g. lemons) whose acids can attack even high-quality steel. Please avoid working on the knife with corrosive or abrasive aids. High-quality knives do not belong in the dishwasher or loose in a drawer (risk of injury!).
Reviews
There are no reviews yet